1 / 7 · GD-PCL01-285 · black housing · product view with lamp off
Colour views
Images show finish, lighting and installation references. Confirm your selected configuration when enquiring.
LED 18W / E27 max. 9W / 900 lm (LED) / IP65
Compliance documentsEMC · LVD · RoHSMatched to the listed configuration ↓A round outdoor ceiling light with an opal dome and a shallow rim, offered with integrated LED or an E27 lampholder. Both versions share the exterior appearance shown in this gallery. Choose the light source below: the LED version is 18W / 900 lm; the E27 fitting accepts a lamp up to 9W. Internal construction and compliance documents must be matched to the selected version.
PRODUCT DETAILS
Nominal product specifications. Values may vary with configuration; confirm your selected combination before ordering.
Final configuration and order requirements are confirmed with our sales team.
View enquiry list →BUYER CHECKPOINTS
Use the product, the application and the evidence together when comparing suppliers.
PRODUCT & MATERIAL
A round outdoor ceiling light with an opal dome and a shallow rim, offered with integrated LED or an E27 lampholder. Both versions share the exterior appearance shown in this gallery. Choose the light source below: the LED version is 18W / 900 lm; the E27 fitting accepts a lamp up to 9W. Internal construction and compliance documents must be matched to the selected version.
VIEW THE FINISH
Review the additional product view alongside the physical sample. Confirm the selected colour and light effect for the exact configuration before placing a production order.
APPLICATION & SELECTION
Consider GD-PCL01-285 for covered outdoor ceilings. Before ordering, confirm the destination market, installation method, supply specification, finish, required packaging and documentation.
CERTIFICATIONS & COMPLIANCE DOCUMENTS
Document availability is verified by model and configuration. Request the corresponding files before approving your order.
LCSB06184058ELCS2024-12-31Configuration matchedLCSB06184057SLCS2025-01-03Configuration matchedLCSA04035154RLCS2025-4-8Configuration matchedLCSB04035013ELCS2025-04-15Configuration matchedLCSB04035012SLCS2025-04-23Configuration matchedLCSA04035154RLCS2025-4-8Configuration matchedDocuments do not extend automatically to a different wattage, light source, driver or construction.
Request compliance documents ↗TESTING & QUALITY CHECKS
Explore factory testing relevant to plastic and resin outdoor lighting: material exposure and protection in use.
Outdoor housings face sunlight over time. See lighting parts placed in our UV chamber for accelerated exposure testing.
Water exposure matters outdoors. See our spray-test setup for checking a fitting’s protection against water ingress.
A mounted sample, a controlled impact. See how a pendulum is used to assess resistance to mechanical impact.
The quotation lists IP65 / IK08 / IK06 by version. These clips illustrate factory procedures, not a test result for this model. Request the matching reports, material information and installation documents for your selected configuration and market.
BEFORE YOU SHORTLIST
The integrated LED version is 18W / 900 lm, with fixed-CCT and 3CCT builds listed. The E27 version takes a replaceable lamp up to 9W; its output and colour depend on the selected lamp. Exterior images are shared, but internal construction and compliance documents must match the chosen version.
Check the physical sample, dimensions (285 × 285 × 90mm), finish, light effect and the requirements of your destination market. Then request documentation for the exact configuration.
Document availability must be checked against the selected wattage, light source, construction and destination market. Tell us which certificates and reports your retailer or importer requires; we will confirm the matching files before the order.
Share the destination country, estimated quantity, selected finish and light specification, plus any logo, colour-box or PDQ requirements. This lets us quote a comparable construction.
NEXT STEP
Choose the required configuration above, then add the model to your enquiry. We will confirm the matching construction, documents and packaging requirements.