OUTDOOR LIGHTING · SELECTION GUIDE
Low Porch Ceilings: When Dealers Should Recommend Flush-Mount Lights
A lower porch does not automatically rule out a pendant. First show the customer a style they like, then check whether shortening the suspension will make it fit. If the complete fitting still leaves too little room for the door or people passing below, recommend a flush-mount.
A real customer question
A homeowner on Houzz wanted to replace a nearly flush porch light with a pendant. They recognised that the door would no longer pass beneath it and asked whether the pendant could be moved outward or the supply point relocated. Read the original question.

Give the customer two pendant styles to choose from
A catalogue photograph rarely tells a customer how far a pendant will hang once installed. The long suspension in the picture can make a suitable design look impossible for their porch. Dealers can help by showing the product and explaining what can be adjusted.
Start with GD-PP033-E27, with its rounded lantern profile and decorative lower finial, or GD-PP028-E27, with a domed top and a more angular lantern body. Both are E27 pendant models, giving the customer a choice of appearance before you check the installed height.
Explain the adjustable cord before ruling out a pendant
We normally supply our outdoor pendants with a 1-metre cord. During installation, the installer can adjust the cord to suit the porch—for example, to 60–80 cm where a shorter suspension is appropriate. For a chain-hung design, the supporting chain and cable must be adjusted together according to the model’s installation instructions.
A 60 cm cord does not mean a 60 cm total drop. The ceiling canopy and lantern body also occupy space. Show the customer the complete assembly, from the ceiling to its lowest point, rather than quoting the cord length alone.

At the showroom, hold the sample at the proposed suspension length or mark its lowest point on the customer’s porch photograph. The customer can then see whether the lantern still looks right and leaves the entrance usable. Confirm the selected model’s adjustment limits before promising a final drop.
If only about 40 cm remains above the door, show a flush-mount
Imagine a porch with about 40 cm between the top of an outward-opening door and the ceiling, and the light positioned within the door’s swing. A pendant with a 60–80 cm cord would already extend below that space before adding the lantern body. If the selected pendant cannot fit even at its permitted shortest suspension, a flush-mount is the practical choice.
That 40 cm is an example, not a universal cutoff. The actual decision depends on the fitting’s total projection, the mounting position, the moving door and the space people need underneath.
Our GD-PCL02-300 gives the dealer a concrete alternative: a round ceiling light with a broad illuminated diffuser that keeps the entrance’s ceiling area open. Show the customer its appearance as well as its side profile, so they can choose it for the finished look—not only because a pendant will not fit.


Make the recommendation easy to check before ordering
Ask for a porch photograph, the floor-to-ceiling height and the gap above the door. Check the full swing of any outward-opening door or screen door, then check the walking route separately. Moving a pendant beyond the door’s swing may still leave it too low above the entrance path.
Use the selected product’s installation drawing to mark its total drop. Ceiling height minus total installed drop gives the height of the light’s lowest point. For a flush-mount, check its actual installed projection too.
For importers, presenting GD-PP033-E27 and GD-PP028-E27 alongside GD-PCL02-300 gives dealers a useful choice within the same outdoor range. Supply the product pictures, adjustment instructions and dimensions together. If the customer is also choosing a wall light, our wall-light sizing guide explains how to make its proportions clear before purchase.
A reply your sales team can use
Compare the options for your outdoor range
Send us the porch dimensions and the model you prefer. We can provide the corresponding product and installation information so your team can explain the choice before the customer orders.
View GD-PP033-E27 · View GD-PP028-E27 · View GD-PCL02-300