OUTDOOR LIGHTING · SELECTION GUIDE
Lighting House Numbers: A Practical Guide for Outdoor Lighting Dealers
When customers say visitors cannot find their house after dark, show them the number and the light together. They can keep a separate address plaque and light it from above, or choose a light that carries the house number on its illuminated face.
A real customer question
A homeowner with a stone colonial house asked how to make the house numbers visible at night. Visitors struggled to find the home, while the illuminated-number products they had seen looked too modern for the building. Read the original discussion.

Keep a separate plaque: show GD-PUD019-R above it
A customer who likes their existing house-number plaque may only need a suitable light above it. Present GD-PUD019-R with the number directly underneath, so the customer can see the proposed arrangement immediately. Its compact, curved body is 171 mm long and offers one starting point for a smaller plaque.

This is more useful than showing a wall light on its own and asking the customer to imagine the result. The plaque can retain the lettering and finish that suit the house; the light is positioned to illuminate its face. Review the plaque width, the gap below the fitting and the visitor’s view together.
For a wider plaque, start with the longer GD-PUD020
Our GD-PUD020 has a 331 mm-long body, compared with 171 mm for GD-PUD019-R. Its longer horizontal shape makes it a natural option to show above a wider rectangular plaque or a more spread-out address layout.

For dealers, the useful comparison is the complete composition: a compact curved fitting above a smaller plaque, or a longer straight fitting above a wider plaque. Body length helps explain the visual fit; confirm that light reaches every character with the selected sample and actual mounting position.
Put the address on the light itself: GD-PNL01
Some customers prefer a single illuminated number panel instead of a separate wall light and plaque. With GD-PNL01, they can apply their house number directly to the light’s front panel.

We supply two complete sets of A–Z letter stickers and two complete sets of 0–9 number stickers. Customers can choose the characters they need and arrange their own address on the panel. For example, “22A” uses two copies of the digit 2 and one letter A.
This also gives importers and dealers a practical stocking option: the same GD-PNL01 model can serve customers with different house numbers. The address is personalised with the supplied stickers, so each number does not need its own preprinted product variant.
Help the customer choose between the three
| What the customer wants | What to show |
|---|---|
| Keep a separate, smaller plaque | GD-PUD019-R above the plaque, with the light switched on. |
| A longer fitting above a wider plaque | GD-PUD020 with the complete number layout underneath. |
| The number and light in one unit | GD-PNL01, with an example address applied to its illuminated face. |
Ask for a photograph of the entrance and the address to display. Show one of these arrangements on that entrance, then check the number from the direction visitors actually approach. Include the other entrance lights in the nighttime check.
A second homeowner reported that a porch light sat behind the house numbers, leaving them hard to read even when the entrance was lit. See the original question. The lesson for a dealer is practical: demonstrate the illuminated number, not only the illuminated entrance.
For separate-plaque arrangements, our wall-light sizing guide helps explain the fitting’s proportions. The scenes here show how the products can be used; final readability depends on the actual characters, placement and viewing position.
Add house-number solutions to your outdoor range
Tell us whether your customers prefer a separate plaque or an illuminated number panel. We can help you compare these three models and provide the corresponding product information.
GD-PUD019-R · GD-PUD020 · GD-PNL01